Automatic heat detector

This circuit uses a complementary pair comprising npn metallic transistor T1 (BC109) and pnp germanium transistor T2 (AC188) to detect heat (due to outbreak of fire, etc) in the vicinity and energies a siren. The collector of transistor T1 is connected to the base of transistor T2, while the collector of transistor T2 is connected to relay RL1.

The second part of the circuit comprises
popular IC UM3561 (a siren and machine-gun sound generator IC), which
can produce the sound of a fire-brigade siren. Pin numbers 5 and 6 of the IC are connected to the +3V supply when the relay is in energized state, whereas pin 2 is grounded. A resistor (R2) connected across pins 7 and 8 is used to fix the frequency of the inbuilt oscillator. The output is available from pin 3. Two transistors BC147 (T3) and BEL187 (T4) are connected in Darlington configuration to amplify the sound from UM3561. Resistor R4 in series with a 3V
zener is used to provide the 3V supply to UM3561 when the relay is in energized state. LED1, connected in series with 68-ohm resistor R1 across resistor R4, glows when the siren is on.
To test the working of the circuit, bring a burning matchstick close to transistor T1 (BC109), which causes the resistance of its emitter-collector junction to go low due to a rise in temperature and it starts conducting. Simultaneously, transistor T2 also conducts because its base is connected to the collector of transistor T1. As a result, relay RL1 energies and switches on the siren circuit to produce loud sound of a fire brigade siren.


NOTE :

.We have added a table to enable readers to obtain all possible sound effects by returning
pins 1 and 2 as suggested in the table.

Tweet